Sexy Emo Beat It Tutorial

Sexy Emo Beat It Tutorial
August 24th 2011
Written By KMLDesignz

Supplies needed
Tube of choice, I am using PTU by ©Lady Mishka
www.lady-mishka.com
You can purchase that here
Scrap kit of choice, I am using PTU Kit Beat It By Pimpd Designz
http://pimp-your-tags.blogspot.com/
You can get that here and here
Font of choice, I am using Contrivance

Let's Get Started

Open up your supplies and minimize for now.

Open a new image 700*500, we will resize later if needed.


Open up pd-frame-02, c/p as new layer

Open up your tube of choice, now depending on which one your
using, this will be a little different, I took sections of my
tube I am using and fit nicely into the frame, different parts
of the body of the tube, then on the right of the frame were I
put a section in, I changed the blend mode to hard light and
duplicated once, DO NOT merge together, I did the same for the left.

I left the middle one alone and added a drop shadow to it.
V&H-1 Opacity-100 Blur-2.00 Color-BLK

Now close all your tube layers and click inside the first square
of your frame, expand by 3

Open up pd-pp-02, c/p as new layer, resize twice @ 70% smartsize
and sharpen twice, invert and delete the excess that hangs, repeat
this step for the other two squares, then merge together and bring
below all layers. Add the same drop shadow as before to your frame.

You can now open back the tube layers.

Let's Decorate the taggie

Open up pd-print-02, c/p as new layer, bring below all layers, duplicate
and flip and place on the other side, make them peek out nicely, I didn't
resize mine, I left as is, you can resize if you like.

Open up pd-ribbon-01, c/p as new layer, bring this above all layers,
I put mine on the bottom of the frame some and added same drop shadow
as before.

Open up pd-tape-01, c/p as new layer, resize 3 times @ 60% smartsize
and sharpen twice, add the same drop shadow as before, I rotated mine
25 degrees to the right before resizing and sharpening. Place in top left.

Open up pd-staple, c/p as new layer, place on top right of the tag
and duplicate and place on the bottom left of the tag. Use sample as
a guide or place as you wish, get creative.

Open up pd-beads-01, c/p as new layer, resize once @ 60% smartsize
sharpen once and place behind all layers, same drop shadow as before,
I duplicated and flipped then mirrored so I have 2.

Open up pd-cardboard, c/p as new layer, put this behind all layers,
duplicate and mirror then flip, so you have 2 peeking out.

Open up pd-glitter-01, c/p as new layer, resize 3 times @ 70% smartsize
sharpen twice, add same drop shadow as before, since I made these
small, I put it on the cardboard layer, so it looks like its on it.
Duplicate and place this one on the other cardboard layer.

Open up pd-arrow, c/p as new layer, resize once @ 45% smartsize
sharpen once and flip, place this on the top of the frame, like its
pointing to the face of the tube. Same drop shadow as before.

pd-cap-02, c/p as new layer, resize twice @ 85% smartsize, then once more
@ 65% smartsize, sharpen twice and add same drop shadow, duplicate twice
so you have 3 layers and place them nicely on the ribbon layer.

Open up pd-heart-01, c/p as new layer, resize once @ 45% smartsize and then
once @ 75% smartsize, sharpen twice and add same drop shadow as before,
duplicate once and place around the tag nicely, use sample as guide or
go your own way and get creative.

Open up you font of choice, add your name and any copyright info that belongs
and save as a png or jpg and your done!

Thanks for trying my tutorial!

Miss Mel Babe Tutorial

Miss Mel Babe Tutorial
August 18th 2011
By KMLDesignz

Supplies need
Tube of choice, I am using PTU Tube by ©Elias Chatzoudis
www.elias-design.gr
You need a license to use it, you can get that here
Scrap kit of choice, I am using FTU kit by Pimpd Designz
http://pimp-your-tags.blogspot.com/
You need to go to the facebook page of her store and like them
in order to get the kit, its worth it! :)
Go Here
Font of choice, I am using Zoe

Let's get started.

Open up pd-frame-04, c/p as new layer, resize 2 times @ 80% smartsize,
sharpen once, click inside your frame with your magic wand, expand by 3.

Open up pd-pp-09, c/p as new layer, resize down some and sharpen at least
2 times, click invert and delete the excess that hangs over, add drop shadow
with these settings to your frame layer, V&H-1 Opacity-100 Blur-2.00 Color-BLK

Open up your tube of choice and depending which one your using, resize nicely and
sharpen at least twice and put it nicely into your frame. Add
a clarify to your tube using 5 for the setting, this is under
enhance photo in PSP. Add same drop shadow as before.
For your frame when you bring the tube below that layer, duplicate the frame once
and bring one below the tube and one above, erase anything that covers the tube
that shouldn't be covering.

Let's decorate.


Open up pd-lace-02. c/p as new layer, resize twice @ 80% smartsize, sharpen twice
and add same drop shadow as before, place this on the bottom of the frame above all layers.

Open up pd-flower-03, c/p as new layer, resize 5 times @ 80% smartsize, sharpen 3
times and add same drop shadow as before. I placed this in top right of the tag.

Open up pd-glitter-01, c/p as new layer, resize twice @ 80% smartsize and sharpen
twice, add same drop shadow as before, duplicate and mirror so you have 2 peeking out.
I placed this below all layers.

Open up pd-bling-02, c/p as new layer, resize 4 times @ 80% smartsize, sharpen 3 times
and add same drop shadow as before, I duplicated twice to have 3 and placed them on the frame,
use sample as a guide or place as you like to.

Open up pd-ribbon-03, c/p as new layer, resize 6 times @ 80% smartsize, sharpen 3 times
and add same drop shadow as before, place in the top left of the tag.

Open up pd-star-01, c/p as new layer, duplicate once and place these in the top left and bottom
right of the tag, peeking out some, sharpen both once and add same drop shadow.

Open up pd-star-02, c/p as new layer, resize twice @ 80% smartsize, sharpen, duplicate once
and mirror and flip and place this one on top peeking out some, place the other
near the bottom peeking out some.

Open your font of choice, add your name and any copyright info that belongs and
save as a png or jpg and your done with the tutorial.

Thanks for trying my new tutorial!!

Edward & Bella Break Me Tutorial

Edward & Bella Break Me Tutorial
August 18th 2011
By: KMLDesignz

Supplies Needed
PSP, any version will work, I use 9
Tube of choice, I am using a FTU by © Zindy S. D. Nielsen
zindy-zone.dk
You can get that here.
Even though the tube is free, you still need to add the correct copyright info on the tag.

Scrap kit of choice, I am using PTU kit Break Me by Pimpd Designz
http://pimp-your-tags.blogspot.com/
You can get that here and here.
Font of choice, I am using Zephyr

Let's get started.

Open up your supplies and minimize for now.

Open up new 700*500 image, we will resize later if needed.

Open up pd-frame-05, c/p as new layer, resize once @ 70% smartsize
and sharpen once or twice, which ever looks best.

Click inside your frame, expand by 3.

Now depending on the tube you are using, the resize will be different,
c/p your tube as new layer, resize this nicely to fit into the frame nice.
Sharpen at least twice, I did mine 3 times, then add clarify to the tube
using 5 as the settings, this is under enhance photo.

Invert, and delete any excess that hangs out, select none.
Make sure your tube layer is below the frame layer.

Add a drop shadow to your frame layer using these settings.
V&H-1 Opacity-100 Blur- 2.00 Color-BLK

Time To decorate your taggie!

Open up pd-flower-03, c/p as new layer, resize this one 4 times @ 80% smartsize,
sharpen 3 times, and add same drop shadow as before. I put this one at the
bottom left of the tag.

Open up pd-hearts-01, c/p as new layer, resize this one 5 times @ 80% smartsize,
sharpen 3 times and add same drop shadow as before. I put this on the top right
side of the tag.

Open up pd-rope, c/p as new layer, resize this one 4 times @ 80% smartsize,
sharpen 3 times, and add same drop shadow as before. Place this one on the right
side of the tag.

Open up pd-staple, c/p as new layer, resize this one 4 times @ 80% smartsize,
sharpen twice, add same drop shadow as before. I placed one on the rope.
Then duplicated and put the other on the bottom of the rope, use sample as guide.

Open up pd-print-01, c/p as new layer, resize this once @ 80% smartsize, sharpen once.
Add the same drop shadow as before, place this behind all layers so it peeks out nicely.

Open up pd-wa-01, c/p as new layer, resize this one 3 times @ 80% smartsize, sharpen twice
and duplicate once, then merge together and add same drop shadow as before.
I placed this on the bottom of the tag nicely between the flower and rope, put this layer
under the flower layer.

Open up pd-leaf-02, c/p as new layer, resize this one twice @ 80% smartsize, sharpen twice
and add the same drop shadow as before, place this nicely over the word art we just did.
You can always use the sample as a guide or place were you want.

Open up pd-flower-01, c/p as new layer, resize this one 4 times @ 80% smartsize, sharpen 3 times,
and add same drop shadow as before, I placed this one below the black flower layer
nicely on the left side of the tag.

Open up pd-moon-01, c/p as new layer, resize this one 3 times, sharpen twice and add same drop
shadow as before, I place this one behind all layers nicely on the top right, to peek out some.

Open up your font of choice, add your name and any copyright info that belongs and save
as a png or jpg and your done!

Hope you enjoyed my new tutorial, thanks for looking!!

Spider Girl Comic Tutorial

Spider Girl Comic Tutorial
By: KMLDesignz
August 10th 2011

Supplies needed
Tube of choice, full length and close up would be best,
I am using PTU tube by ©Elias Chatzoudis
www.elias-design.gr
You need a license to use and can get that here.
Scrap kit of choice, I am using PTU kit Comic Girl by Pimpd Designz
http://pimp-your-tags.blogspot.com/
you can get that here and here.
Font of choice, I am using BadaBoom BB, you can download here.

Let's get started

Open up a new image 700*500, we will resize later if need.

Open up your supplies and minimize for now.

Open up pd-frame-06 c/p as new layer, resize once @ 70 smartsize
sharpen once, click inside and expand by 3 with you magic wand.

Open up pd-pp-07, c/p as new layer, resize twice @ 70 smartsize,
then once at 85 smartsize, sharpen twice. Click invert, then delete
the rest that hangs over the frame, invert again and select none.

Bring this below your frame layer, give your frame layer a drop shadow
V&H- 1 Blur- 2.00 Opacity-100 Color-BLK

Now for your tube, if you have a nice close up of the face this
will work nicely, if you don't, don't resize too much. Take your
close up and have it fit nicely into your frame, erase any that hangs over.

In your layers, change the blend mode to hardlight, only your tube
layer, it will then blend nicely into your paper. You can also play
with the other settings and might find another you like.

Now take your full length of your tube, c/p and depending on your tube
resize nicely and sharpen at least 2 times, add same drop shadow as before.


Let's decorate!

Open up pd-skyline, c/p as new layer, resize 3 times @ 80% smartsize, sharpen twice, add
same drop shadow as before, place below all layers peeking out on top.

Open up pd-moon, c/p as new layer, don't resize, add same drop
shadow as before just lower the opacity to 46, duplicate, then
merge those two together, place below the skyline layer
so it looks like its sitting like the "real" moon.

Open up pd-spider02, c/p as new layer, resize 2 times @ 70 smartsize, sharpen twice,
add a gradient glow of white to it and then same drop shadow as before. I placed mine
in the left corner of the tag, use sample as guide.

Open up pd-sign-01, c/p as new layer, resize 3 times @ 70% smartsize, rotate 20 degrees
to the right, sharpen twice and add same drop shadow as before, I place this on the top
left of the tag above the spider layer.

Open up pd-bracket, c/p as new layer resize once @ 85% smartsize
sharpen twice, add a white gradient glow to it, and same drop shadow as before,
place one on the left side, then duplicate and place the other on the right, rotate
this one @ 9 degrees to the right, sharpen again. Use sample as a guide to place them
nicely on the tag so they peek out nicely some.

Open up pd-splatter-02, c/p as new layer, resize twice @ 85% smartsize, sharpen twice,
add same drop shadow as before, duplicate, mirror place one on the bottom of the tag nicely,
then bring the other up nicely so it peeks out some on top, merge together and place behind all
layers so it peeks out nicely behind them.

Open up pd-bubble-01, c/p as new layer, resize 6 times @ 85% smartsize, sharpen 3 times,
add same drop shadow as before, place in top right corner, use sample as guide.

Open up pd-fence, c/p as new layer, resize once @ 70% smartsize, sharpen twice, add same
drop shadow as before, place behind all layers, duplicate and mirror.

Open up pd-wa-03, c/p as new layer, resize 3 times @ 70% smartsize and once @ 85% smartsize,
sharpen 3 times, add a white gradient glow to it, same drop shadow as before. I placed mine in
the bubble layer so it looks like the tube is saying/thinking it.

Open up pd-spider-web, c/p as new layer, bring this below all layers, add same drop shadow.

Open up your font of choice, add your name and any copyright that belongs,
save as a png or jpg and your done!

Hope you enjoyed my new tutorial!!