Update

Hello everyone

I was going through some of my comments and some said they wished I used FTU stuff, well the CT I am on is for her PTU stuff so I use those for my kits.. I use to make tutorials just based off my "regular" type tags, would you like to see more of those come back as well? Just leave a comment on this post and I will read them after, I haven't made one of those in awhile. Hope your still enjoying the tuts, thanks!!

*Hugs*

Hot Teena Tutorial

Hot Teena Tutorial
By KMLDesignz
July 30th 2011

Supplies need:
Tube of choice, I am using PTU tube By ©Elias Chatzoudis
www.elias-design.gr
You need a license to use it and you can get that here
Scrap kit of choice, I am using PTU kit Teen Queen by Pimpd Designz
http://pimp-your-tags.blogspot.com/
You can get that here and here
Filter Factory J-Toners (optional)
Font of choice, I am using Federico

Let's get started

Open up your supplies and minimize for now
Open up a new image 700*500, we will resize later on if needed.

Open up pd-frame-01, c/p as new layer, resize once @ 80% smartsize, sharpen once.
Click inside your frame with your magic wand, expand by 3

Open up pd-pp-07, c/p as new layer resize 3 times @ 80% smartsize, sharpen at least 2 times.
Invert then delete the excess that hangs over, bring this layer below the frame layer. Select None.

Open up your tube and depending on the tube, if it has a close up to the face you can do this step
or you can use the whole tube to do it.

Resize the tube at least once nicely, bring it below the frame layer but ABOVE the paper layer,
erase any that hangs over, now on the blend mode, change it to hard light, or play with them and
choose the one you like or looks best depending on your supplies.

Now take your normal size tube, c/p again and resize nicely depending which one your using,
place this on top of the frame layer, duplicate the frame and bring one below the tube and
one above, the one above, erase any that covers your tube. This next step is optional.

Add toners to your main tube layer. Do this once.
Red-12 Green-14 Blue-11


Let's Decorate!

Open up pd-fastener, c/p as new layer, resize this 3 times @ 70% smartsize, and sharpen twice,
add drop shadow, V&H-1 Opacity-100 Color-BLK Blur-2.00 duplicate and flip then mirror and place
nice on the other side of the tag, use my tag as a guide.

Open up pd-tape-01, c/p as new layer, resize 3 times @ 70% smartsize, sharpen 3 times, add
same drop shadow as before, place on the lower right of the tag, use sample as guide, duplicate
and rotate this 90 degrees to the right and then place this one on the top left of tag, again
use my sample as a guide or place were you like or want it.

Open up pd-ribbon-03, c/p as new layer, resize 4 times @ 70% smartsize, sharpen 3 times, add
same drop shadow as before and place this in the bottom right of tag, use sample as guide or
go your own way and make it your own.

Open up pd-kiss, c/p as new layer, resize 6 times @ 70% smartsize, sharpen 3 times, add
same drop shadow as before, lower the opacity to 64, place on top left of the frame, duplicate
and place this one on the other side, use sample as guide or place were you like.

Open up pd-wire, c/p as new layer, resize once @ 70% smartsize and sharpen twice, add same
drop shadow as before, place this behind all layers nicely so it peeks out some.

Open up pd-notebook-paper, c/p as new layer, bring this below all layers, sharpen twice, add
same drop shadow as before. Have it peek out nicely behind all the layers.

Open up pd-glitter-02, c/p as new layer, resize once @ 70% smartsize and sharpen 3 times, duplicate
and flip then mirror, place behind all layers and have it peak out nicely.

Open up pd-print-01, c/p as new layer, resize once @ 85% smartsize, sharpen once, place behind all layers,
duplicate, flip and mirror so its nicely on top and bottom, add same drop shadow
but change the opacity to 53, merge together these 2 layers.

I added noise to this layer and brought to Animation Shop, you can do this as well or skip.

Open up your font of choice, add your name and any copyright info that belongs on the tag,
save as a png or jpg and save, and your done!!

Hope you enjoyed my tutorial.

Sexy Mermaid Tutorial

Sexy Mermaid Tutorial
By KMLDesignz
July 29th 2011

Supplies Needed
Tube of choice, I am using PTU tube by ©Lady Mishka
www.scrapsandthecity.com
You need a license to use it, you can get that here.
Scrap kit of choice, I am using PTU kit Atlantis by Pimpd Designz
http://pimp-your-tags.blogspot.com/
You can get that here and here.
Font of choice. I am using Diplomatic

Let's get started

Open up your tube and minimize for now, open kit of choice.

Open up pd-frame-01, c/p as new layer, resize once @ 80% smartsize
sharpen once, select inside your frame with the point to point, expand by 3
or depending on which frame you use.

Open up pd-pp-01, copy and paste as new layer, resize 5 times @ 80% smartsize sharpen
three times, invert and then delete the excess, select none and bring this below the frame layer.

Add a drop shadow to your frame layer.
V&H- 1
Opacity-52
Blur-2.00
Color-BLK

Open up your tube and c/p as new layer, depending which tube you use, resize nicely so it
fits on the frame, sharpen at least twice, and add drop shadow to the tube\
V&H- 1
Opacity-100
Blur-2.00
Color-BLK

Let's Decorate!

Open up pd-cluster-01, c/p as new layer, resize 3 times @ 80% smartsize, sharpen twice
mirror it and place nice below all layers and have it peak out some.

Open up pd-glitter-01, c/p as new layer, resize twice @ 80% smartsize sharpen twice and
add same drop shadow as the tube, place behind all layers, duplicate and place them nicely
so they peak out on both sides of the layers.

Open up pd-mesh-02, c/p as new layer, resize twice @ 80% smartsize, sharpen twice, add same
drop shadow, resize again @ 85% smartsize, and sharpen again, place nicely behind all layers.

Open up pd-sand, c/p as new layers, resize 3 times @ 80% smartsize, sharpen twice, add
same drop shadow as frame. place this above the mesh layer.

Open up pd-spray3, c/p as new layer resize once @ 80% smartsize, sharpen once, place this
below all layers but above the sand layer.

Open up pd-shell-03, c/p as new layer, resize 6 times @ 80% smartsize, sharpen twice, add
same drop shadow as tube, place on the left side of the tag above all layers.

Open up pd-starfish-01, c/p as new layer, resize 8 times @ 80% smartsize, sharpen 3 times
same drop shadow. Place near the shell some, use my sample as guide.

Open up pd-waves-01, resize once @ 80% smartsize, sharpen once, add same drop shadow as frame.
Place below all layers so it looks like its behind like water.

Open up pd-print-01, c/p as new layer, resize 4 times @ 80% smartsize, sharpen twice, place this below the glitter layers, duplicate and merge together.

Open up pd-pearl, c/p as new layer, resize 10 times @ 80% smartsize, sharpen twice, add drop
shadow, place nicely on the frame border, duplicate so you have 4 and place them nicely, use
sample as guide. Duplicate again and put 2 on the other side.

Open up font of choice, add your name and any copy right info that belongs and save as
a png or jpg and you all done!!

Hope you enjoyed my tutorial!!

Rock N Roll AC Scraps

Rock N Roll AC Scraps
KMLDesignz
July 16 2011

Supplies Needed
Tube Of Choice, I am using PTU tube By Arthur Crowe
www.clarkdark.deviantart.com
You need a license to use it and you can purchase that
here to use it.
Scrap Kit of choice, I am using PTU kit Rock N Roll Betty By Pimpd Designz
http://pimp-your-tags.blogspot.com/
You can buy that here and here
Font of choice, I am using Rock Salt


Let's Get Started.

Open up a new image, 700*500, we will resize later if we want.

Open up your supplies you are using and minimize them for now.

Open up pd-frame-03, c/p as new layer, resize once at 60% smartsize and sharpen once.

Click inside your frame with the magic wand and expand by 2

Open up pd-pp-06, c/p as new layer, resize twice @ 60% smartsize and sharpen twice.

Click on invert and delete the excess paper hanging off, invert and select none, bring this layer
below your frame.

Open up your tube and depending on the tube your using resize nicely to fit in your frame enough.
Erase any that hangs over the frame, duplicate your frame layer and bring one above all layers
and have one below the tube layer, erase any of the one that covers the tube parts.

Add a drop shadow to your frame. V&H-1 Opacity-100 Blur-2 Color-BLK
For my tube I added different parts of the tube in my frame above the paper and played with the opacity
of the layers and put them @ 76, you can do this or not. Make sure you erase any that hangs out of
the frame.

Let's decorate your tag.

Open up pd-ribbon-02, c/p as new layer, resize 2 times @ 60% smartsize and sharpen once, I erased
some of it and out it behind the tube layer but above the frame, for this you will need to duplicate
your tube layer and bring it above all layers, then erase any that hangs over, don't worry, your
original tube layer will still make it look like its there. Duplicate the ribbon and mirror for
the other side and duplicate the tube again and do as before.
Add same drop shadow to the ribbon layers as before.

Open up pd-safety-pin, c/p as new layer and resize once @ 60% smartsize and sharpen once.

Add same drop shadow as before and place on the left bottom side of the tag on the frame.

Open up pd-cherry-tattoo, c/p as new layer resize 2 times @ 60% smartsize and sharpen once,
add same drop shadow as before and place on bottom right of tag on frame.

Open up pd-dots-01, c/p as new layer, resize once @ 60% smartsize and sharpen once, add same
drop shadow as before, duplicate once and flip then mirror and bring it up some so the layers
look like one, then merge them together and bring this below all layers and place nicely so it
peaks out some.

Open up pd-notebook-paper, c/p as new layer, resize once @ 60% smartsize sharpen twice and add
same drop shadow as before, place behind all layers, flip and mirror then place it so it peaks
out some on the bottom of the tag.

Open up pd-flower-02, c/p as new layer, resize once @ 60% smartsize and then twice @ 80% smartsize
sharpen twice and add same drop shadow as before, I placed this on the bottom left of the tag on the
safety pin.

Open up pd-diamond-01, c/p as new layer resize twice @ 60% smartsize sharpen twice and add same drop
shadow as before, duplicate and use sample as a guide to place them, or place were you like.

Open your font of choice, add your name and any copyright info that belongs and save as a png or jpg.

Your Done!! I hope you enjoyed my new tutorial!!