Wednesday, February 2, 2011

Ashley Girlz Rock Frame Tutorial



Ashley Girlz Rock Frame Tutorial
KMLDesignz
February 2nd 2011

Supplies Needed
Scrap Kit Of Choice
I am using Girlz Rock Collab
By Pimp'd Designz & Designs By Sarah
http://pimp-your-tags.blogspot.com/
Which you can buy here and here
One Graphic of choice
Font Of Choice, I am using AnacostiaNF
My supplies here
Any version of PSP

Let's Get Started
Open a new image 600*400 big enough to play around
we will resize later.

Open up Frame 3 in the kit
Copy and paste as new layer on your image, resize @ 50% smartsize once and sharpen once
click inside your frame with your magic wand, expand by 5

Open up your graphic of choice, copy and paste as a new layer and resize enough
so it looks nice in your frame, click invert, then delete, select none.
I sharpened my graphic twice.

Add a drop shadow to the frame
V&H-1
Opacity-100
Blur-2.00
Color-BLK


Time to decorate your tag :)

Open up the flower in the scrap kit, copy and paste as a new layer
resize this % 50% smartsize twice, and sharpen once, add the same drop shadow as before
I placed mine in the left bottom corner.

Open up the splash in the kit, copy and paste as a new layer
resize this at 50% smartsize once, sharpen once and add same drop shadow as before.
I placed this behind the tag, just enough so it peaks out. Use sample for guide.

Open up ribbon 4 in the kit, copy and paste as a new layer. resize @ 50% smartsize
once, sharpen once and add same drop shadow as before, I place this above the frame
and made sure the flower was above the ribbon, use sample as guide or place were you like.

Open up the staple in the kit, copy and paste as new layer, resize once @ 50% smartsize,
sharpen once, duplicate this once and merge down so its one layer. Place this in the
top left corner of the tag, use sample as guide. I added the same drop shadow as before.

Open up the ripped paper in the kit, copy and paste as a new layer
resize twice @ 75% smartsize, sharpen once, I place mine behind all layers
just enough so it peaks out, use sample as guide. add same drop shadow.
I then duplicated it once, mirrored and then flipped so it peaks out the other side.

Open up the tape in the kit, copy and paste as a new layer
resize this twice @ 50% smartsize, sharpen twice.
Place this in the top right corner of the tag, duplicate once
then rotate 90 degrees to the right, merge together these 2 layers.
Add the same drop shadow as before.

Open up the purple heart, copy and paste as a new layer
resize once @ 50% smartsize then once @ 75% smartsize
Sharpen once, same drop shadow as before, I placed this in the bottom right corner,
use sample as a guide or place were you want :)

Now with the supplies I provided
Open up the fence in the supplies, copy and paste as a new layer
resize this twice @ 75% smartsize, sharpen twice, add same drop shadow as before.
bring this below all the other layers, use sample as a guide, I made mine so it
peaks out some.

Open up the supply that says elements1, I used this as a mask,
open up paper 9 in the kit, apply the mask to the paper, then merge group
copy and paste the mask on your image, bring below all other layers.
I then used my deform tool and fit to the tag so it looks nicely behind the other
supplies, use my sample as a guide.

Merge layers visble, choose your font, add any copyright info. Save as a PNG or JPG
Your choice :)

Thanks for trying my tut, I hope you enjoyed it.

Monday, January 10, 2011

Torn Scraps Tutorial



Torn Scraps Tutorial
By KMLDesignz
January 10th 2011

Supplies Needed
2 Graphics of choice or 1 graphic
I used 2 and blended mine together, if you do this make sure they go together.
Font of choice, I used Grenouille
Any version of PSP
Factory J Plugin toners Here
Scrap Supplies here

Let's get started

Open up a new image 600*400 we will resize later
Open up your graphics of choice.

I used 2 pics and blended them together, if you used one that's fine.
Open up the torn frame in the supplies
copy and paste as a new layer, resize this by 60% smartsize one, then sharpen once.

use your magic wand and click inside the frame, expand by 5 and paste your
graphic of choice as a new layer, resize some so it looks nice in the frame
invert, then delete, select none, bring your graphic layer below the frame.
Add a drop shadow to the frame layer
V&H-1
Opacity-100
Blur-2.00
Color- Blk

Open up the cardboard frame in the supplies
Copy and paste as a new layer, I resized this @ 85% Smartsize twice till it
fit behind my frame, then I used the deform tool and brought it in some so it fits
nicely behind the frame as a background, use my sample as a guide.
I also resized my other frame so its not bigger than the cardboard piece, use
my sample as a guide.


Time to decorate.

Open up the stiches in the supplies, copy and paste as a new layer
Resize these @ 60% smartsize 3 times, I put this on the bottom of the
cardboard frame so it looks stapled, I erased the parts that hang off.
Sharpen twice, add the same drop shadow as before. duplicate it once and flip it
so its on the top of the cardboard piece. Use sample as guide.

Open up the ribbon in the supplies, copy and paste as a new layer
Resize this @ 60% smartsize 4 times, then once more @ 85% smartsize
Sharpen once and add the same drop shadow as before.

Open up the buttons in the supplies, I selected the metal one, choose which ever.
Copy and paste as a new layer resize @ 60% smartsize 5 times and sharpen twice
add the same drop shadow as before, duplicate once and place on the ribbon.
Use my sample as a guide to place them or place as you like.

Open up the star in the supplies, copy and paste as a new layer
resize this @ 60% smartsize 4 times and sharpen twice, use same drop shadow
place this on the top of the frame in the left corner, duplicate once and place
other one on the right side of the frame, use my sample as a guide.

Open up the tag in the supplies, copy and paste as a new layer.
Resize this @ 60% smartsize 3 times, sharpen once. add the same drop shadow.

Open up the staples in the supplies, copy and paste as a new layer
resize these @ 50% smartsize once and sharpen twice, duplicate it 3 times and
merge just the staples together, then place on the tag like in my sample or
were you like.

Open up the notebook paper, copy and paste as a new layer
resize this @ 70% smartsize once, sharpen once.
Bring this below all the other layers, add same drop shadow as before.
duplicate this one and mirror it, then merge these two layers together.

Choose your font, Merge all layers visble, Resize if you like, I kept mine as is.

Put your name and any copyright info on the tag, save as a png or jpeg which
ever you like, I like png cause they go on backgrounds better.

Your done!! I hope you enjoyed my tut, I love seeing samples you make :)

Thursday, January 6, 2011

Frame Tutorial



Frame Tag Tutorial

Supplies needed
4 Graphics of choice
Scrap supplies of choice or ones I supplied
Font of choice, I used Love Ya Like A Sister
Word Art Of Choice
Template
Supplies Here
Filter Factory J plugin-Toners Here (Optional)

Everything I used is supplied

Lets get started

Open up a new image 600*400

Open up your template, copy the frame and paste as new layer. I resized it By
60% smartsize once. Sharpen once

click inside your first frame with your magic wand, Expand by 5

Open up your graphics of choice and choose one you want to use first.

Depending on the graphics your using, resize to your liking.
after resizing, I sharpened mine at least twice, invert, then delete and bring
this below the frame layer.

Repeat these steps for your other 3 frames with the other graphics.

Add drop shadow to frame
V&H-1
Opacity-100
Color-blk
Blur- 2.00

I then used my factory J plugin and picked toners with these settings and added it
to all my pics to give it a soft look.
Red- 7
Green- 14
Blue- 18
I did mine twice, use to your liking :)

Time to decorate your tag :)

Open up paper1 and paper2 in the supplies, copy paper1 and paste as a new layer
resize this @ 70% smartsize once, then sharpen once and add same drop shadow as before
copy paper2 and do the same, I put this one on top of paper1 and put them in the
left corner of the tag, use example above for placement or place were you like.

Open up the staple in the supplies, copy and paste as a new layer, I resized this
@ 70% smartsize once then sharpened once and gave it the same drop shadow, place
this over the papers we just put on the tag so it looks like its holding them.

Open up the background paper and copy and paste as a new layer
resize this @ 70% smartsize twice, sharpen once, bring this below all layers
Give it the same drop shadow as before once.

Open up the glitter in the supplies, copy and paste as a new layer
I resized this one @ 70% smartsize twice and sharpened twice
I put this above the background paper we just did, and adjusted it so its
peeking out a little,look at example for an idea, add the same drop
shadow as before, duplicate this once then flip it once
and it will peek out on the bottom as well.

Open up the fence in the supplies (its labeled scrap challenge)
copy and paste this as a new layer, resize twice @ 70% smartsize and sharpen 3 times.

I brought this above the glitter, gave it the same drop shadow as before.
Adjust it some so its peeking out a little on the top and sides, duplicate once
and flip then mirror, make it peek out a little on the bottom as well, use example for guide.

Open up the star in the supplies, copy and paste as a new layer, resize this
@ 70% smartsize 10 times, sharpen twice and use same drop shadow as before
I then duplicated it once and put them both on the right side, top and bottom.

Open up the wordart in the supplies, copy and paste as a new layer
resize this @ 70% smartsize 4 times and place in bottom left corner
sharpen twice and add same drop shadow as before, this is optional you can
always add whatever you want to make the tag your own, be creative :)

Merge all layers visible, resize @ 70% smartsize or whatever size you want and sharpen once.
choose your font and put your name on it and
any copyright info that goes on, save as a png and your done!

I hope you enjoyed my new tutorial, I would love to see examples :)

Wednesday, December 15, 2010

Robert Pattinson Scraps Tutorial



Robert Pattinson Scraps Tutorial
By KMLDesignz
December 15th 2010

Supplies Need
Template 141, Here
Scrap kit of choice or the one I used Here
Leaf It To Me SK
Font of choice, I used Nori
3 graphics of choice
No plugins needed :)


Let's get started

Open up the template, delete the copyright info (layer 8), I then cropped it out
some so it goes to 100%

I also deleted off the mask layer as I didn't use it, this is optional.
Its layer 2 if you delete it.

I then closed off all layers but raster 4, click inside one of the boxes
with your magic wand, I deleted the black, open one of your graphics
copy and paste as new layer, resize if needed to your liking, invert
then delete, bring this below raster 4, repeat for your remaining pics.

Then go back to raster 4 layer, select all, float, defloat, open up a paper
from the scrap kit, I used PP8, copy and paste as a new layer
resize it to your liking then click invert and delete, then select none.
I deleted raster 4 layer

I then added a drop shadow to the paper layer.
V&H-1
Opacity-100
Color-Black
Blur- 2.00

Open up all layers again, go to raster 3, click inside the circle with the
magic wand, select contract and put in 2, then I clicked on smooth under
selections then modify to smooth (put in 10 for both) it out before deleting the gray out.

Now open up another paper from the kit, I used Paper8
copy and paste as new layer, resize down some, invert, delete then select none.
bring this layer below raster 3, add the same drop shadow as before to raster 3.

select raster 5, click the box and then go to contract and put in 25
then delete, so you have only a border for the black box.
Open up another paper, I used PP9 for this one, resize some, invert, then delete, select none.
add the same drop shadow as before to this one. I deleted the gray border layer.

Now select the raster 6, click it with the magic wand, open up a paper again,
I used Paper7, copy and paste as new layer, resize some, invert, delete, select none.

drag this layer below the border layer we just did before.

Now click on raster 7, this should be the heart layer.
Click inside the heart, contract by 1, then smooth and click delete to get rid of the grey.
Open up another paper, I used Paper9, copy and paste as new layer, resize some, invert
then delete, add the same drop shadow as before to the white heart.

Time to decorate.
Open up the element folder from the kit

Open up flower 5, copy and paste as new layer. I resized this by 50% smartsize twice
then 85% smartsize 3 times, sharpened once and added the same drop shadow as before.

I then duplicated this to have 3 flowers, place them as above or as you like.

Open up Star 1 in the kit, copy and paste as a new layer, I resized this 5 times
doing 50% smartsize, then sharpen once. I duplicated this one too so I had 4
use tag above to place them or place them to your liking :) add the same drop
shadow as before.

Merge all layers visble. then choose your font of choice, I used Nori
Put your name on it and add the same drop shadow we used, duplicate it once
then merge down. add any copyright info and merge layers visble.
Save as a png or jpeg and your done!!

Hope you enjoyed my tut :)

Saturday, October 30, 2010

Border Scraps Tag Tutorial



Border Scrap Tag Tutorial
By KMLDesignz
October 30th 2010

Supplies Needed
Graphic Of Choice
Font Of Choice
Plugins:
Eye Candy 4000
Filters Unlimted 2.0
Filter Factory J-Toners (Optional)
You can get those here
Rest of Supplies Here

Let's get started

open a new image 600*400, we will resize later
Open up scrap paper provided and copy and paste onto your new image
resize this @ 70 % smartsize 3 times, sharpen once, then take your deform tool
and take the sides in some and the top down a little
I colorized mine with filters unlimted to match my tag colors, you can do the same.
Open graphic of choice and copy and paste onto your new image
resize to your liking, use sample above for ideas
Make sure the graphic layer is above your scrap paper layer

Go back to the scrap paper layer, open up Eye Candy 400 and click on gradient glow
Click on the color tab and click fluorescent tubing one, I removed all the blue colors
and made the last blue one white, then go back to the basic tab and make the size 3.00
soft corners @ 25 and opacity @ 100 and the selection checked, fool around with the color
so it makes a nice border around the tag. repeat this once more with the same settings.

Then add a drop shadow to the scrap paper you just did the gradient glow to
H&V-1.00
Opacity-100
Blur- 2.00
Color-BLK

Do the same gradient glow steps to your graphic layer with the same drop shadow.

Time To Decorate The taggie :)

Take your supplies and open them up in PSP, Click on the notebook paper layer
Copy and paste this on to your new image, make sure its below your graphic layer but above
the scrap paper layer.
I resized mine @ 70% smartsize twice so it peaks out of the graphic just enough then sharpen once, duplicate
this and then mirror it to the other side so it peaks out a little as well.
Add the same drop shadow as before.

Open up the splat layer in the supplies, copy and paste onto the new image
resize @ 70% smartsize twice, and put this below the notebook paper layer, I colorized mine to match.
You can do the same if you want or keep it black.

I duplicated this and played with it so it peaks out a little on the right side of the tag
use sample above for postion.

Open up the star in the supplies and copy and paste onto the image, resize to your liking
I resized mine @ 70% three times and sharpened twice, added the same drop shadow as before.
I duplicated mine a few times and placed them on the tag like in sample, you can do this as well.

Open up the staples in the supplies, copy and paste onto the new image
I resized mine once @ 65% smartsize and sharpened twice then duplicated twice and merged them
together, then duplicated it once more and place this one in the top right of the tag, use sample
above to postion them :)

Last part, open the ribbon in the supplies, I colorized mine to match.
Resize this @ 65% smartsize 7 times, sharpen once, add same drop shadow as before.
I placed mine under the star layers so the stars are on the corners.

Open the scrap paper up again, colorize to match your tag, I resized it @ 65% smartsize twice
then I took the deform tool again and brought in the sides some and the top, make sure its still
bigger than your background one we did before.
Go to adjust and then blur and click on Gaussian Blur, make the settings @ 15.00
Stay on this same layer
Before adding the weave, close out the blur layer and merge everything else together then resize @ 85%
smartsize once then sharpen once. open the blur layer and resize it the same, no sharpen.
Then go to Eye Candy 4000 and click on weave with these settings
Ribbon Width- 3.00
Gap Width- 1.00
Shadow and Thread detail both @ 0
Thread Length @ 3.00
Color- White

Pick out your font and add your name and any copyright info and save as png or jpeg.

Hope you enjoyed my tut!!

Other samples of the tutorial


Thursday, October 7, 2010

Update

Hello all

Just a quick update on the tuts that I got the supplies back for some, below are the ones I still don't have the supplies, until I get them, the links DO NOT work, sorry. I will update them once I reclaim the supplies that go with them, Thanks!!

Tut links and links that DO NOT work

Scrap Tag Tutorial
New Tutorial
Selections Scrap Tutorial
Scraps Collage Tag/Wallpaper Tutorial
Grunge Scrap Tag Tutorial
Avatar Tutorial
Grey Frame Link

Stamp Frame Tutorial


Stamp Frame Tutorial

By: KMLDesignz

October 7th 2010

Supplies Needed
Stamp Frame
Notebook paper of choice
3 Graphics of choice
Font Of Choice
Word Art Of Choice
Scrap Supplies Of Choice
Factory J Plugin Here
Stamp Frame Here
Other Supplies Here


Let's Begin

Open a 600*400 new image
open up the stamp frame provided in the supplies
copy it then paste it onto your new image you just made
Resize the frame once with 70 smartsize
Sharpen the frame once

Open up your 3 graphics you are going to use, pick the first one

Select the first frame with your magic wand, then go to selections and click expand and expand
the selected frame by 4
Copy your first graphic you are using, then paste unto the image, resize till its
were you want the pic in the frame, go to selections and click invert, then delete, then click invert
again, then select none. Drag this layer below your frame, repeat this for the other 2 graphics.

For my graphics I used a plugin, Factory J and then Toners with these settings
Red-14
Green-14
Blue-44

I did this twice with the same settings.

I added a drop shadow to the frame using
Vertical- 1
Horztional- 1
Opacity-100
blur- 2.00
color-blk

Time to decorate the tag.

Open the notebook paper provided or one of choice
Resize the paper @ 70 smartsize all layers NOT checked
sharpen once, I added the same drop shadow as before
Duplicate this layer once. Mirror it then flip it and adjust it so it peeking out from
behind the frame a little.

Open up the staples in the supplies, copy and paste them onto your image, make sure this is
on top of the image, resize @ 60 smartsize, sharpen twice, then duplicate twice then merge down
the layers so its one staple layer, then duplicate once more and then rotate @ 90 degrees to the right
and put it on the other side of the tag, the rotated one is on the right for me.

Open up the star provided, copy and paste onto your image, resize this @ 40 smartsize
sharpen once, I duplicated mine so I ended up with 4, place were you want or use
header for example. Merge them together then sharpen once more and add the same
drop shadow as before.

Next open up the splat in the supplies, copy and paste it onto the image
I resized mine @ 60 smartsize once, resize to your liking, I then dragged this behind
the notebook paper, I also colorized mine to match my tag using
Plugin filters unlimited using the color effects then the colorize HSB one and
picked a color in my tag, this is optional as you can leave it black. I then
duplicated this and fliped it then mirrored to put in the other corner. look at
header for example.

Add the same drop shadow as before

Open up the cardboard piece in the supplies, copy and paste onto image
I put mine behind the notebook paper, then duplicated and mirrored then fliped and had
it under the other notebook layer. merge the cardboard pieces together and add the
same drop shadow as before.

Open up wordart 1, copy and paste onto image, resize till it fits nicely on the tag
sharpen twice, then duplicate it once and then merge together, then duplicate again
and mirror it so its on the other side of the tag. merge together. add same drop shadow
as before.

Open up wordart 2 and do the same as the other one, I put mine in bottom right corner
of the tag.

for the top of the tag, choose either wordart 3 or 4 your choice, and do the same as the others
and place on top of the tag, use header as example.

Last wordart, open wordart 5 and do same, I put this one on each side of the tag.
Merge all visble, then I resized the tag @ 80 smartsize, this is your choice, if you do
sharpen it once.

Open font of choice, add name and same drop shadow as before, duplicate once, then
merge together, add watermark, save as png or jpeg, your choice. make sure you crop out
the extra background of the image, so its not so much background or white if you save as jpeg

Your done! :) I hope you enjoyed my tut :)

Other examples of this tut before I wrote it out :)